Dangerous cargo endorsement (DCE) certificate online application procedure for Oil Chemical and Gas in MMD / documents required for level 1 & 2 DC

DG Shipping has taken new initiate for the processing of oil, chemical and gas dangerous cargo endorsements certificate online (DC Endorsements) for Level 1 (Operational or Basic) and for Level 2 (Advanced or management level). Now we dont have to personally visit MMD for documet submission or collecting certificate. Everything can be made online. This article defines you the step by step process for the online application.

WATCH VIDEO

CLICK HERE TO WATCH ON YOUTUBE

1) Open www.dgshipping.gov.in
2) Go to e-governance and log in using your INDOS number and password

3) Open the tab COC, DC endorsement, GMDSS Radio operator

4) Select basic (type 1 for operational level) or Advanced (type 2 for management level)

5) All your personal details will be there by default. In this page you have select MMD name type of dce required (Chemical, oil or gas), New or Renewal. Require all other details as required and press continue

6) Enter your postal adress and select you want DCE BY POST or will collect BY HAND

7)Enter the certificate details

i) AFF/basic fire fighting

ii) Ref AFF/ Ref basic fire fighting

iii) advanced/ basic tanker familiarization course

8)Enter your seatime and cargo carried

9) Next pae shows the fees to be paid

i) Rs 3000 for Basic

ii) Rs 4500 for Advanced

10) If all datas are entered, then generate the APPLICATION NUMBER. Make sure all datas are entered correctly before this step. Datas cannot be changed after this step.

11) Once the application number is generated, you can click on Pay Now link to proceed for payment. You can make payment with debit card, credit card, net banking and wallet.

12) Make payment

13) You will get the acknowledgment receipt

14) Now next step is to upload the certificates. Go to the home page and click on DC, COC endorsements as we did earlier. Now click on the link pay COC, COP fees, upload documents.

You can also pay the fees later with this link.

15) You can upload the required files from here

i) Signed application form in pdf format

ii) Photograph in jpg format as per specification 

iii) Signature as per specification in pdf format

iv) Certificates in one pdf file

v) Compnay letter in pdf format

vi) old dce certificate in pdf format

vii) Self attested pdf file of CDC showing all relevant sea time

Upload the documents

16) You can see the below page with comment, Documents successfully uploaded.


17) Now you can check the status of your application by visiting the link PAY COC, COP FESS, LOAD DOCUMENTS AND VIEW STATUS link.

Once the status shows approved, you can personally collect the document from the MMD if you have selected the mode as BY HAND or you will receive by post if you have selected the mode as BY POST


GIVE US YOUR VALUABLE COMMENTS AND SUGGESTIONS. ALSO LIKE OUR FACEBOOK PAGE AND FOLLOW US ON GOOGLE TO GET ALL UPDATES. SHARE WITH YOUR FRIENDS

Latest Maritime News

Cargo ship Mustafa Kan sank off sicily in mediterranean sea

DG Shipping to issue marksheet along with COC

DG shipping has taken new initiative to issue the mark sheet. For the first time marksheets are being issued to all candidates of foreign going grades on sucessful completion of written and oral examination along with the Certificate of Competency (CoC) for nautical wing. Marksheet for 2nd Mate(FG), Master (FG) and 1st Mate(FG) started issuing from 1st, 19th and 30th September, 2016, respectively. Below is the notice diplayed in dgshipping official website. No message has not yet come for the engineering wing.

 Follow our blog and like us on facebook to get all new updates

Ballast water management (BWM) convention to enter into force in sep 2017

The International Convention for the Control and Management of Ships' Ballast Water and Sediments (BWM Convention) will enter into force on 8 September 2017. The convention stipulates that it will enter into force 12 months after ratification by a minimum of 30 States, representing 35% of world merchant shipping tonnage. Finland ratified this convention on 8th september 2016 to make the total gross tonnage to 35.1 percent and contracting parties to 52. So, after 12 months from this date, this convention will come into force on 8th september 2017.

This convention deals with halting the spread of invasive aquatic species, which can cause havoc for local ecosystems, affect biodiversity and lead to substantial economic loss. Under the Convention's terms, ships will be required to manage their ballast water to remove, render harmless, or avoid the uptake or discharge of aquatic organisms and pathogens within bal'iast water and sediments

The BWM Convention was adopted in 2004 by the lnternational Maritime Organization (lMO), the United Nations specialized agency with responsibility for developing global standards for ship safety and security and for the protection of the marine environment and the atmosphere from any harmful impacts of shipping.

From 8 September 2017, all ships of 400gt and above will be required to have onboard
- An approved Ballast Water Management plan
- A Ballast Water Record Book.
- All ships fitted with Ballast water treatment systems must have a type approval certificate in compliance with the IMO Guidelines for the approval of ballast water management systems
- An International Ballast Water Management Certificate or statement of compliance.

Master checker - seafarers personal database in dg shipping e-governance profile

 All the seafarers have been provided with the facility to view his or her details in the master Checker in his profile. In the Master Checker, the candidate can view all the data such as CDC details, Training details, sea service details, COC details, details of other certificates like Watch keeping, Dangerous Cargo endorsement, GMDSS etc.

It is mentioned that this data is uploaded in the system by the issuing authorities. Therefore, if there is any corrections to be made in the data or if some details are found missing, then the candidates please approach the respective authorities/agencies as under-
-INDOS database- INDOS cell
-CDC details- Respective Shipping Master
-Training details- Respective Maritime Training Institute
-COC details- Nautical or Engineering wing of DGS
-WKC/ Dangerous Cargo/GMDSS- Respective MMDs
-Sea service details- Shipping Company if Articles of Agreement is to be uploaded or RPSL if the -Form -IIIA is to be uploaded. (It is mentioned here that the RPSL cannot uploaded the data which is more than three months old).

All seafarers has to make sure that RPSL agencies, Maritime Training institutes and the Ship owners have uploaded the data regularly in time, so that the seafarer is not inconvenienced at the time of the assessment for examination or endorsements.

Explain shipping term Sheer and its purpose

This article explains the terms sheer, flare and camber in ship construction and its purpose

Sheer
Sheer is the rise of the deck in a fore and aft direction. The amount of the sheer is measured vertically from a level line through the deck at the midship to the deck at the two perpendiculars.

Purpose
a) To increase the reserve buoyancy at the ends of the vessel.
b) To counter the immersion of the ends that may occur during pitching and is important particularly for smaller vessels
c) To increase the "Seaworthiness of the ship, that is amount of water coming in on deck would be reduced
d) since fore end is more susceptible to immersion than the aft end, "standard sheer is a parabolic curve with sheer twice that of sheer aft. Modern ships have straight line sheer, often in the fore body only, in some cases only over the forward one third ship's length. Sometimes, very large ships, the minimum bow height is achieved without the need for sheer, conversely, very small vessels may hve very large sheer forward and aft

Flare and its purpose

Camber and its purpose

Explain Camber in ship construction and its advantage?

This article explains the definition and purposes of camber, sheer and flare.

Camber
Camber is the rise of the deck from the ships side to the centerline,

Purpose
a) to facilitate drainage of water,
b) Increase the resistance to deflection under load;
c) Standard camber is parabolic and approximately 1/50th of the breadth of the ship. Modern ships have "dog-log' camber where they are level across the deck between the hatches then dropping in a straight line to the deck at side.
d) the upper deck were to be constructed flat, the humps & hollows that occur due to welding distortion would delay complete drainage.

Flare and its purpose

Sheer and its purpose

Define Flare in ship construction and its purpose

This article explains that Definition of flare, camber, sheer and thier purposes.

Flare It is the outward curvature of the shell at the forward end of the ship.

Purpose
a) It increases the reserve of buoyancy at the forward end to give better seaworthiness when pitching.
b) water is dispersed away from the ship when lightly pitching (driver deck)
c)  creates it wider forecastle deck, giving more spaces for the fitting off machinery such as the windlass
d)  allows it cleared up life of the anchor from the water, thuz reducing hul damage by abrasion

Sheer and its purpose

Camber and its purpose