We request the readers to answer the blanks in the comment column below so that it will be helpful to all others referring this questions
1. Open-loop transfer function of a system having one zero with positive real values is called _______ phase function
2. In a Control Loop System, having Zero(0) Positive Real Values are called ____________.
3. Resistance of a wire is increased if the Length is____ and Area is _____.
ANS - INCREASED, DECREASED
4. The type of the system whose transfer function is given by
G(S) =(s2+3)/(s5+s4+s3+3s2+2s) is:
5. A semiconductor is damaged by a strong current, because of (1)________ (2)________ (3)________
6. Permanent damage to semi conductor due to overcurrent may be caused due to ______ _______ _______
7. For a given line voltage, four heating coils will produce maximum heat when connected in__________
8. WHAT IS VALUE OF Vgs WHEN Id EQUALS ZERO
ANS - PINCH OFF VOLTAGE
1. Open-loop transfer function of a system having one zero with positive real values is called _______ phase function
2. In a Control Loop System, having Zero(0) Positive Real Values are called ____________.
3. Resistance of a wire is increased if the Length is____ and Area is _____.
ANS - INCREASED, DECREASED
4. The type of the system whose transfer function is given by
G(S) =(s2+3)/(s5+s4+s3+3s2+2s) is:
5. A semiconductor is damaged by a strong current, because of (1)________ (2)________ (3)________
6. Permanent damage to semi conductor due to overcurrent may be caused due to ______ _______ _______
7. For a given line voltage, four heating coils will produce maximum heat when connected in__________
8. WHAT IS VALUE OF Vgs WHEN Id EQUALS ZERO
ANS - PINCH OFF VOLTAGE
1-non minimum
ReplyDelete2-unstable
4-1
5-short circuit,overloading,overheating
6-low breakdown voltage & over heating
7-parallel