Actions carried out when Electrical Machines (Motor) flooded with Sea Water

When Electrical Machine is flooded with SW:

• Machine is disconnected from power sources and dismantled.
• All salt deposits washed out with FW.
• If deposited with oily bilge water, wash out with Electro Cleaner.
• Should be heated with lamp, and enclosed or covered up to retain the heat.
• Moisture should be escaped, by lifting the cover continuously or periodically.
• Hottest part of the machine shall not exceed 90°C, while heating.
• IR readings and temperatures taken regularly, until constant value reach about 1 m Ω.
• Then, spray the machine with insulation vanish.
• Assemble and put in service with low load, if possible.